Darwinbots Forum
Code center => Bugs and fixes => Solved Bugs => Topic started by: Shadowgod2 on July 13, 2014, 04:58:42 PM
-
ok so making a new bot i found a problem. the ties only have an id# of one while i need and have in the dna 2 .tie store.
-
using this bot i found out that the id# changes the cycle right after it's formed
-
That may be so. Although, I think the robot is still using the 2 id#. edit:
It may reset but you will have to set it again. I am not sure if this is by design or not. But that is how it works, and I really do not want to screw up the current mbs.
MBs was always poor design in db2. That is why anything other then a snake or a catapiller does not work very well. Hopefully this will be solved with DB3.
edit: Lets just say that only the later statement is factual. I have a bad habit of doing that. :banghead:
-
Does it have a feeding system yet?
-
on but i was thinking if using ties. back to the drawing board.
-
Scratch that, I have tested this stuff my self.
Looks like tipres is giving me the correct information:
attached is 4MB... Take a look at what tiepres is returning.
Maybe it was something weird with birth tie...
-
Here we go, here is
working version of your bot.
edit: Ok for some reason 4MB works, but this thing does not, not sure what is going on here.
-
Ok, here is yet another version of your test robot that works consistently. Multibots are a pain.
edit: Go ahead and take the stifftie out, should work fine w/o it.
-
yes they are but they're so fun to watch. :D